Refined Products

Standard grades with custom blends available on request—supported by full CoA and MSDS.

CoA Provided ISO-aligned QA Marine & Road Supply
Jump to: Gasoline Diesel Jet A‑1 LPG Fuel Oil / VGO Base Oils / Bitumen

Gasoline

RON 91/95 grades with controlled sulfur and aromatics; vapor pressure tailored to climate and regulatory needs.

RON 91 / 95 Low Sulfur Seasonal RVP
Request Quote
PropertyTypicalMethod
Research Octane (RON)91 / 95ASTM D2699
Motor Octane (MON)82 / 85ASTM D2700
Sulfur, ppm≤ 50 / 10*ASTM D5453
Reid Vapor PressureSeasonalASTM D5191
Benzene, vol%≤ 1.0–2.0ASTM D3606

*Ultra‑low sulfur available by market. Replace figures with your approved specs.

Diesel / Gasoil

Low‑sulfur grades for transport and industrial use, with winterization options and CFPP control.

10–500 ppm S CFPP Managed Road & Marine
Typical Spec PDF
PropertyTypicalMethod
Sulfur, ppm10 / 50 / 500ASTM D5453
Density @ 15°C, kg/m³820–860ASTM D4052
CFPP, °C-5 to -20 (seasonal)EN 116
Cetane Index≥ 46–51ASTM D976/D4737
Viscosity @ 40°C, cSt2.0–4.5ASTM D445

Adjust ranges to match your certified grades per market.

Jet A‑1

Produced to meet aviation standards with rigorous filtration, handling, and certification.

ASTM/DefStan CoA + Release Into‑plane optional*
QA Process

*Where local permits and facilities exist.

PropertyTypicalMethod
Flash Point, °C≥ 38ASTM D56/D3828
Freeze Point, °C≤ -47ASTM D5972/D2386
Density @ 15°C, kg/m³775–840ASTM D4052
Aromatics, vol%≤ 25ASTM D1319
Sulfur, mass%≤ 0.3ASTM D4294

Values are indicative—use your approved CoA for contracts.

LPG (Propane‑Butane)

Residential and commercial distribution via bulk and cylinder networks; odorized as required.

Propane/Butane Mix Odorized Bulk & Cylinder
Packaging Options
PropertyTypicalMethod
CompositionP/B per marketGC
Vapor Pressure @ 37.8°CPer specASTM D1267
ResiduePassASTM D2158
H₂SPassASTM D2420

Mix ratio and limits vary by jurisdiction—confirm during ordering.

Fuel Oil / VGO

For marine and industrial applications; support for bunker blending and viscosity targets.

HS/LS Bunker Blend Viscosity Targets
Bunker/Industrial Enquiry
PropertyTypicalMethod
Viscosity @ 50°C, cStAs orderedASTM D445
Sulfur, mass%Per marketASTM D4294
Water, vol%≤ 0.5ASTM D95
Cetane/CCAI (if applicable)Per gradeCCAI

Tailored specs available for regional compliance and performance.

Base Oils & Bitumen

Group I/II cuts and paving grades for lubricants and infrastructure projects.

SN 150/500/900 Group II Bitumen 60/70, 80/100
Spec & MSDS Pack
Cut / GradeTypicalMethod
SN 150 Visc @ 40°C28–32 cStASTM D445
SN 500 Visc @ 40°C90–110 cStASTM D445
SN 900 Visc @ 40°C300–400 cStASTM D445
Bitumen Penetration60/70; 80/100ASTM D5
Softening Point46–52°CASTM D36

Provide exact grade list and targets per your certifications.

Quality Assurance

Every batch is sampled, tested, and certified. Certificates of Analysis are issued at loading with independent inspection as requested.

  • Lab QA: calibrated equipment and inter-lab proficiency testing.
  • Online analyzers on critical streams (sulfur, octane, etc.).
  • Batch retention samples and document control.
Compliance
  • ISO‑aligned QHSE frameworks (9001/14001/45001).
  • ASTM/EN/DefStan benchmarks per product.
  • MSDS available; safety data shared with buyers and carriers.

Packaging & Delivery

Supply via marine, road, and bulk/cylinder networks. Packaging depends on product and destination compliance.

  • Marine: FOB/CFR/CIF ex‑jetty with custody transfer metering.
  • Road: calibrated loading racks and sealed documentation.
  • LPG: bulk trucks and approved cylinder partners.
Packaging Options
Bulk (marine/road)
ISO tanks (where available)
IBC totes / drums*
Cylinders (LPG)*

*Subject to product compatibility and local regulations.

Ordering & Incoterms

We support term and spot sales with flexible delivery terms.

  • Incoterms: FOB, CFR, CIF, Ex‑Tank (as applicable).
  • Documentation: CoA, MSDS, B/L, inspection reports, and customs forms.
  • Payment: as per contract (banking details provided upon KYC).
Request a Quote

Downloads

Factsheets and typical specifications.

Gasoline Typical Spec
Diesel Typical Spec
Jet A‑1 Typical Spec
LPG Typical Spec
Fuel Oil/VGO Spec
Base Oils/Bitumen Spec

Product FAQ

Yes—upon request we coordinate with global inspection firms and share reports with shipping documents.

We adjust blending and certify to local regulations; provide the target spec at RFQ stage.

CoA, MSDS, B/L, packing lists, and customs/port forms as required by destination.

Ready to place an order or request a tailored grade?

Our trading desk will align delivery windows and documentation to your market.

Contact Us Refinery